My Origami Heart – a true story layout.

posted in: Layouts | 4

This week I am focusing on a boyish layout using my some of my favourite Lady Pattern Paper papers. We already know how versatile they are combined with other patterned papers,
but today I am sharing how simple it is to choose which papers to use.
true story layout

This layout started off with a fun and vibrant floral patterned paper. I then grabbed my stash of Lady Pattern Paper and chose which colours best matched and complimented the patterned paper – and the following colours won loose hands: Red Pop, So Buff and Intense Teal – perfect for a boyish themed layout with a fun twist.

But that’s not all, I also embossed some stars onto Green Chartreuse using a green embossing powder that turned teal and matched my layout perfectly. My red origami heart is a fun twist using a piece of scrap paper. Foam tape was used to adhere the heart to add some dimension.

Here’s how I created my elements:

Step 1

Stamp stars onto green chartreuse patterned paper using VersaMark ink pad. Sprinkle embossing powder over the stars and shake off the excess.
step 1

Step 2

Heat the stars using a heat gun until the embossing powder is fully melted and shiny. Cut out the stars.
step 2

Step 3 – Folding the origami heart

Cut your patterned paper 11 x 11cm square. (click to view the easy step by step illustration)

My layout is comprised out of blocks of paper with the corners rounded and adhered to the background. My photos are scattered in between the blocks and then finished off with embellishments, embossed stars, the folded heart, rub-ons and a die-cut title.
detail 2
Use your corner rounder to get perfectly rounded corners each and every time.

detail 3

Use your scrap papers to create beautiful squares – perfect for a layout like this.

folded heart
Larger pieces of scrap paper is perfect for folding elements on your layout – use every single inch of your papers.

A simple layout finished off with little details adding interest, dimension and texture. I love the simplicity and details the papers offer this layout.
for a full step x step visit Lady Pattern Paper’s website

Get moving – a card in a box for Imagine Crafts.

posted in: Cards | 0

I am on the Imagine Crafts blog with this super fun and easy card with a twist.
Sometimes creating a flat card is just not good enough, sometimes something different is refreshing.
For today I created an accordion fold card inside a little box. Not only can it be used for the card, you can add a small gift inside for the recipient too.
For a full step x step head on over to the blog! I am simply in love with the StazOn Glaze inks – versatile and amazing to work with!
Happy inking!

Scrap-a-doodles Design Team Final audition – layout and cards.

posted in: Cards, Layouts | 2

So this past month has been a bit of a whirlwind with teaching around the country, traveling and creating. And one of the exciting things is that I made it through the first round of the Scrap-a-doodles design team and here a week or so later is my next entries. I am not a busy scrapper, I am a ME scrapper, true to myself and my odd style with some techniques thrown into the mix. Love it or hate it – this is me and I am totally comfortable with it all. So for this week I created a layout and some cards. The layout is done using the new Fancy Pants range of paper with some photos of my niece. As with most of my layouts i added some of my current favourite techniques and elements alongside this bright and beautiful range of paper.
HER BEAUTY LAYOUTI used a few sheets of patterned papers which also included some of her favourite colours at the moment. One such product is this tree die-cut from Couture Creations. I first added a layer of green Distress ink and then misted it with Gold Mister Huey ink to add the shimmer.
DIE CUTSOne of my favourite new border punches is this circle punch – not only because of the circles which i love but also the endless supply of confetti dots that i can recycle and use again all over. On top of the punched border I added another little die cut element using a Sizzix die cut with my Cuttlebug.


Step 1 – I cut the shape out of white ‘technique’ cardstock
step 1 die cut

step 2 – ink the die-cut with Versamark ink on a scrap piece of paper.
step 2 inking

step 3 – Add your first colour of embossing powder over the inked die-cut. Shake off the excess and return it to the container.
step 3step 4 – Heat set the embossing powder until fully melted. Once the powder is shiny that’s when it is melted.
step 4

step 5 – Leave the embossed die cut to cool down before inking it again using the Versamrk ink. If the embossing is still hot the embossing powder will pull off and stick to the ink pad damaging the surface. Once the die cut is inked, lightly sprinkle a thin layer of gold embossing powder onto the die cut.
step 5
step 6 – Heat set the gold embossing powder for a multi coloured effect. Cut the element in half to use on your layout.
step 7
To create my own elements for the layout I cut the sun on my silhouette machine and then added
a layer of colour using Distress ink.
step 1 – Press the ink pad onto your craft sheet repeatedly until you see some colour.
*lighter colours may not be visible on your craft sheet
1 inking die cuts
step 2 – Mist the ink with water until colour drops form
3 inking die cuts
step 3 – Dip the die cut into the ink until it is fully coloured. You can leave it to dry naturally or heat set the colour with a heat gun.
If you want a darker more intense colouring leave it to dry and then add another layer of colour until you are happy with the look.
2 inking die cuts
I love stamping and what better way than to create my own stamps and use different mediums to add interest to the stamping. For my background circles I used 2 colours of Mister Huey inks to stamp with. My stamp was die cut using fun foam and a circle die from Provo Craft. I simply adhere the foam circle to an acrylic block using double sided tape.
step 1 – Mist the 2 colours on top of each other on your craft sheet
1 two tone stamping
step 2 – Dip your stamp into the ink and carefully lift it. Avoid getting too much ink on your stamp, when turning it over the ink may splash and drip all over your project – a little ink goes a long way
2 teon tone staping

step 3 – Position the stamp onto your cardstock and press down – the ink may cause it to slip so be carefully and hold it steadily. Hold your cardstock down with your one hand and lift the stamp carefully not to smudge the image. Repeat as desired
3 twon tone stamping
and so I completed my layout using lots of different techniques and products to add colour, texture and interest.
Products used
Patterned paper: Fancy Pants Meology Inks: Mister Huey Gold & Classic Tan, Distress ink Evergreen Bough, Versamark ink pad Die-cuts: Sizzix Decorative Icons Set, Couture Creations Tree Punch: X Cut Border Punch Dotted Wave Embossing Powder: AC Zing embossing powders Other: Heat Gun, Fun foam, Craft sheet, Mini mister, Cuttlebug
I love making cards as well. A couple of years ago I fell in love with the Gorjuss range of stamps. These stamps are perfect for colouring in, and so I simply had to re-create some cards i made years ago for a class – and if you know me this is rare.
What I love about these easy cards is that the stamps are really versatile and opens a world of opportunities by combining techniques and products to get different effects.
card 1I stamped the images onto white watercolour paper and coloured them using my Distress markers. Once i finished colouring the images I added some paper pieced layers to the images adding to the cute factor.
Here’s how i did it
step 1 – Stamp the image onto the white cardstock using black Versafine ink. Versafine ink is perfect for the detailed images with their fine lines and also dries permanent and will not affect your painting with water at all.
step 1 painting
step 2 – On an acrylic block lightly scribble your marker to add colour to the surface.
TIP – Always use the flat side of the brush tip to scribble with and colour to the block, to avoid damaging the tip itself
step 2 colouring
step 3 – Mist the ink with water and then use a small soft paint brush to paint your image
step 3 colouring
step 4 – Repeatedly stamp the image again onto scrap pieces of patterned paper. I only stamped the areas I know that i am going to cut out and use as paper pieced images liek the rabbit and the dress. The cut out the image and ink the edges
step 4 coluring
step 5 – Adhere the cut out image to the stamped image on the white cardstock that you are colouring in. I sometimes add the cut out paper pieces first and then add my colouring afterwards to avoid colouring an area that I may cover with paper later
step 5 colouring
Finish off your cards with other elements that will match the theme or the colours of your card. Remember that any good card has a background, embellishments and a focal point
And here’s another card I made using my left-over papers and elements.
card 2
Products used
Stamps: DoCrafts Gorjuss Inks: Tsukineko Versafine, Ranger Distress ink Markers Patterned paper: Teresa Collins She Said 6×6 Paper pad, Bazzill Cardstock, Watercolour paper Other: Sewing machine, Embroidery thread, Buttons, diamante, paper doilies, Olba flower punch

I leave you with this canvas i did earlier in the year and am now working on a second and third one to match….
altered canvas
texture paste and shimmery mists in gold – pure joy

texture paste
Happy crafting! And here’s to creativity and design teams and living a creative life everyday!
Love what you do and do what you love!

Prima – stamped frame of mind – the artist within me.

posted in: Uncategorized | 3


I love my stamps – and a good design can be so versatile! The thing about stamps is that you can use them over and over again and they never go to waste. Using the same stamp in different ways combining them with different products and techniques is what makes stamps so versatile. So for this week’s project I took to the new artistic stamps from Prima – don’t you just love the “girls”.

stamping frame jnjpgSo once I decided on the image I wanted to use I thought it would be fun to do a bit of a masking technique and combine the image with different stamps and stencils to create a background effect. So here’s how I did it

Step 1
stamp the Karlie image twice. Once on the white cardstock you will use for your project and again on a scrap piece of paper.

step 1 jnStep 2
cut out the image stamped onto the scrap piece of paper. You want to cut on the line as opposed to just outside the line on the outer edge.

step 2 jnStep 3
use sticky squares to adhere the cut out image on top of the image stamped onto your cardstock. Then ink your second stamp and over stamp onto the background where you want your design to be.

step 3 jnStep 4
When you lift your stamp you can see that you stamped onto the background as well as onto the cut out image only. When you remove the cut out image from your project the second stamped image will appear as if it is in the background behind the original stamped image – pretty cool!

TIP – the cut out image also prevents you from messing up your original image – this is a great way of adding stamping to a project after you have finished it and if you think it needs a little something!
step 4 jnStep 5
Use your artiste markers and water to colour in your image. Once you are done colouring add some gold glitter glue to dress up your image and add some sparkle to it.

I cut my image smaller and added some stencil ling and ink splats to the background. My stamped images created a corner effect to frame the center image. I then added flowers and other decorative elements to finish off my art work before popping it inside of an empty gift box lid. In the end I had a funky little artwork to use in my studio.

step 5 jn

I added gold glitter glue to my coloured image and love how that turned out. I hardly ever use glitter glue out of the bottle, I always squeeze it onto my finger tip and then apply it – this way you don’t get those unsightly glue streaks and marks left by the tip of the bottle, but rather a clean glittered look.

stamping painted jnI also added some more Prima embellishments and pieces cut from their paper pads to decorate my image
stampingjnand no Prima project is complete without their beautiful blooms

stamping flowers jnI hope this inspired you to pull out those stamps and utilize them even more! Happy stamping!

Products used
PM 980023 Cling Stamp – Karlie
PM 990114 Cartographer Cling Stamp
DDOA851303 Artiste Dual Tip Pens – Brush & Marker – Watercolour
ADCO 721981 Couture Creations Glitzin Glamour – Aztec Gold
PM 814144 Seashore Collection Kit
TVF-82 VersaFine Ink Pad – Onyx Black

Secret Treasures dies by Couture Creations

posted in: Layouts | 2

I am a paper scrapper at heart – so there’s something really special about being able to create elements using just paper for cards and layouts. Above anything else I choose to use paper on my layouts with a few smaller embellishments, but ultimately paper rules my creativity. So naturally when I create dies is one of my favourite elements to include. I can use small scraps of paper and cardstock to cut different elements out of to add as accents on my layouts, I can add different techniques to plain pieces of cardstock and I can dress them up or down as much as I like to. For my layout I chose to emboss my die-cuts – this enabled me to pick up on the beautiful and dramatic turquoise-green in the patterned paper I used, and also the neutral brown I used as my matting to ground the elements. I used three different dies on this layout to add to my outdoorsy feel. I used the beautiful rocking horse die, tiny birdies and the beautiful large leafy die – all of them perfectly fitting into the design in their own unique way dressed up in a shiny new coat of heat embossing.

pure joy jn layout

Die-cut your elements out of plain white cardstock of medium weight

step 1

Cover the entire element with a layer of Versamark ink. Press the ink pad repeatedly onto the
die-cut for an even cover of ink. Work on a sheet of scrap paper for the inking part

step 2

Move the die-cut onto a clean sheet of paper. Cover the die-cut with a layer of embossing
powder and shake off the excess powder

step 3

Heat the element using your heat gun until the powder is fully melted. Leave to cool down
before handling the die-cut. You can add another layer of embossing for a smooth finish

step 4

Tips and hints

  • Embossing two or more layers will give you a really smooth finish
  • You can decant your embossing powders into small plastic tubs with a plastic spoon making it easier to use. I store my powders this way so that I can easily return the excess powder into the container. Spooning the powder onto your elements over the tub also makes for less waste
  • The golden rule of embossing can be applied to most embossing powders – when it goes shiny, it is done heating.
  • Once an element has been embossed, the embossing powder needs to cool down before handling. If you touch it while the embossing is still hot, you will leave your finger print behind with a really unpleasant burn