I Believe layout featuring Le Petit Jardin

Welcome to the blog today – I am sharing a beautiful simplistic layout with you today using the Le Petit Jardin range.
This range won’t be complete with the amazing Poppy Hot foil stamp added to it. I think its my new favorite of all designs.

layout
step 1 – Cut out some flowers from the paper #04. I cut out a large selection of all the different flowers to create my clusters with.

step1

step 2 – Cut a strip 3″ (7.5cm) wide from the striped paper piece. Trim the barcode off as well to use from this sheet. Adhere the striped piece flush at the top of your background cardstock piece, and the barcode strip just below it.
step2Create some hotfoil Poppy elements to use on your layout.

step 3 – Heat your foil stamp in the GoPress and Foil. Place gold foil face down onto the hot stamp.
step3

step 4 – Place patterned paper on top of the foil and then add your shims. I used the back of paper #08  as well as some other scraps to foil my flowers onto.
Send the stacked foil stamp through your GCut machine.
step4
step 5 – Remove the shims and the foiled paper to reveal the foiled image.
Remember to keep your foiled scraps to use – I show you how I recycle these at a later stage.
step5
step 6 – Cut out your foiled flowers – I made some in gold and some in turquoise. See how the patterned paper background adds interest to the foiled flowers.
step6

detail6

detail3

detail2

detail4

Assemble your layout by adding your matted photo. Then adhere your flowers clusters and finish off by layering the foiled poppy flowers on top. Add pearls, diamante and stamped details to your layout.
Add some ephemera elements as well.

Thank you popping by today – hope this inspires you until next time.
Jowilna x

Couture Creations List of Materials

CO725414Jardin paper #12
CO725449  Jardin pa #04
CO725455 Jardin pa #08
CO725446 Ephemera set
CO725355 Go Press and foil machine
CO724824 GoCut and Emboss Machine
AD49574 Hotfoil Poppy stamp
AD49576 Mini stamps
ULT2000001 Snow White Card stock

Double up on Mixed Media Layout.

I love dabbling in mixed media elements on my layouts. You may think of going overboard but for me, the wisdom lies in knowing when to stop, when you can take something away instead of adding that one thing,
then you know you have created something special that focuses on the photo and the story
JowilnaNolte_Whisper_KC_MixedMediaL

This range is perfect for those special memories where you may only have a single photo that you can use enlarged to tell your story.
JN_Whisper_detail4
You can head over to the Kaisercraft blog here to see the full step x step for this layout.

step1

PRODUCTS USED:

 PAPERS: WHISPER Collection: P2676 Organic, P2681 Raw, P2682 Bisque, P2684 Buff, SS379 Sticker Sheet,
KC PRODUCTS: Kaisermist Brown KM130, Kaisermist Black KM 131, DD3319 Tree Trunk Decorative Die, DD001 DIYcuts Diecutting machine, DD3321 Fern Leaf Decorative Die, IT483 Ferns Template,
Other: Modelling Paste, wooden stars, rhinestones, foam tape

Download the full step by step instructions by clicking on above main image or HERE

Hide and Seek layered Layout by Jowilna Nolte

Welcome to today’s blog post. Are you loving the new ranges this month as much as we do?
Today I am sharing a fun layout with you using the Hide and Seek range… perfect for those little people in our lives.
Apart from the cute little critters I am simply in love with the beautiful color palette of this range.JN_myboy_layout

I really wanted to include some of the beautiful feathers from the range into my layout, but the stamp set was a bit small.
So I used a feather image from the internet (free) and printed it onto vellum in grey ink on my inkjet printer.
Immediately as it came out the printer and while the ink is still wet I add white embossing powder and heat it with my hat gun for  a beautifully embossed feather.

JN_detail1

JN_detail2

Elements from my collectables pack create a beautiful cluster combined with stamping in navy blue.

JN_detail4

Extra cut out animals line the bottom edge of the background keeping the bear company.

JN_detail5

I used foam tape to raise some of the cut out elements and leaves for dimension. Tucked underneath the cluster of leaves is some thread.

JN_detail6

JN_detail3

JN_detail7

Until next time – have fun with this gorgeous range.
Jowilna xxx

Kaisercraft Products:  Hide and Seek Range | P2564 Bears | P2560 Trees | P2559 Woods | CS330 Clear Stamp  | CT940 Collectables | T315 Double Sided Tape
Other: Printed feather; vellum; white embossing powder; heat gun; thread; foam tape; navy blue ink

CSI Inspiration with Imagine.

This month the team from Imagine crafts are playing along over at CSI Challenges blog. We used Case File 255 . You too can pl;ay along and win some awesome goodies from the sponsors including Imagine.

Did you know June 1 is Donut Day? Hey, any day is a good day to celebrate with a donut, but here at CSI, we’re celebrating with a delightful Case File inspired by California designer Lianna Hee.

Feel free to interpret the Case File in any way that inspires you, or for our traditional clues, scroll down to the bottom of this post.32083881_753173058404418_4069384240540680192_o

Imagine_JowilnaNolte_CSI_Case255

How Jowilna solved the Case File: Evidence: solid white background, scallops, hearts, dots, circles, texture paste. Testimony: Juggling life; journaling in a circle; inspiration words for my title

detail4

detail3

detail2

detail1

I used my Fireworks sprays from Imagine mixed into texture paste and stenciled through a dot stencil to achieve the coloured dots.
This is part of solving the case and also using some of my favorite products and techniques.
Will you play along this month?

Decorative Dies on a layout for Kaisercraft.

This week on the Kaisercraft blog we are using Decorative Dies on projects – I love these textured dies for various reasons. But I think their simplicity is the best thing about them.
You can dress them up or keep things simple like I did this time.
I had a piece of white cardstock with some ink stains on it and used that to cut the Textured Brickwork die out of the inked parts.
This created an interesting effect, that is instant and beautiful.KC_JN_DD_layout
The butterfly stamped on acetate was folded in half and attached using a brad.

KC_JN_DD_detail3

The background has some gorgeous blue pattern on it created using Infusions. Such a beautiful and unexpected effect that I love with this pink and green paper combo.

KC_JN_DD_detail4

KC_JN_DD_detail2

KC_JN_DD_detail1

Coloured paint splats in shades of pink, green, blue and black pull everything together.
And of late I am really loving this simplistic style of scrapping – Perfect for creativity and using up my odd stash of embellishments.

KC_JN_DD_detail5

All Kaisercraft products are distributed by The Wholesaler in South Africa.
Products used:
Kaisercraft Products: SS361 Sticker Sheet, P2515 Dreamer, CS324 Clear Stamp, DD970 Stamp Tropics, DD480 Texture Brickwork
Other: White cardstock, Walnut ink, Infusions, Diamante, StazOn ink, Acetate, Brad, Sequins, VersaFine Smokey Grey ink, Date stamp

Creating a Sticker mat behind a photo – Kaisercraft.

On the Kaisercraft blog today I am sharing this layout using stickers – and lots of them.
I love the sticker sheets with each range, but I don’t use them nearly enough. This month I am on a mission to try and use my stickers in creative ways
on my layouts and cards. And in fact I have managed to use almost every single sticker from my sheets -mission accomplished.thankful_layout_Fleur_JN

detail5

What have you done lately with this beautiful range lately? And more importantly your stickers?
Share how you are inspired by the sticker sheets this month with your unique creations – we would love to see your work.

Kaisercraft Products: SS361 Sticker Sheet, P2515 Dreamer, T606 Bricks Template
Other: White cardstock, walnut ink, Orange and pink oxide ink, Diamante

Create a Dazzling Raspberry Red Scrapbook Layout.

Don’t you just love red, and with the month of love we are celebrating raspberry red with loads of repetition. I created this shimmering layout using tons of red ink and then added a few splashes of other color for some fun contrast. Take a look at how I created the fun shimmering elements, stamped with the amazing new raspberry red shaded Glamorous VersaFine Clair and had fun with repeating elements in my design.

Skill: Intermediate
Time: 1 hour

2018_Feb_JN_detail3

2018_Feb_JN_red_layout

Step 1 – Add a small amount of Creative Shimmer onto your Craft Mat. Add a few drops of dye inkers to the medium. I added 2 colors of red.

2018_Feb_JN_red_step1

Step 2 – Mix the inker into the paste really well using your palette knife until the paste is fully colored.

2018_Feb_JN_red_step2

Step 3 – Apply the colored paste through a stencil onto craft paper and leave to dry. The creative medium dries really fast and has a stunning shimmer.

2018_Feb_JN_red_step3

step 4 – Use the same inkers to color a piece of smooth white cardstock. Drop a few drops onto the cardstock and mist with water.
2018_Feb_JN_red_step4

Step 5 – Apply some of the colored paste onto the colored cardstock using the same square stencil.
2018_Feb_JN_step5
step 6 – Color a sheet of white cardstock with the same red inkers. Once dry stamp some images onto the background using VersaFine Clair Glamorous.2018_Feb_JN_step6

step 7 – Add random color splats using Fireworks sprays to add color to the background. Cut out flowers from patterned papers and adhere them. Then stamp some random text in the background using VersaFine Clair.
2018_Feb_JN_step7
step 8 – Use VersaFine Clair Pinecone and stencil some dots onto the background. Then adhere your photo. Cut stenciled squares with a beautiful shimmer from the papers and adhere to the layout. Add diamanté to finish off.
2018_Feb_JN_step8

2018_Feb_JN_red_detail1

2018_Feb_JN_red_detail2

Supplies

Imagine
Other
  • Cardstock – white
  • Jowilna Nolte – stencil, stamp
  • Kaisercraft – patterned paper

Kaisercraft Documented Layout with hints of colour by Jowilna Nolte

Hi everyone, Jowilna here on the blog today sharing a Documented layout with a hint of colour. I simply love this range but wanted to add a touch of colour.

detail4_JN

I started off creating my mixed media inked background using re-inkers.
The effect left a hint of cream, yellow, a beautiful grey and even some blue and green colours visible once the ink had dried.

love this layout_JN

A variety of Collectables elements added the yellow tones and for the blue/green I added some scrunched up thread under my photo.
This multicoloured thread gave me the interest and hint of colour I craved.

detail3_JN

detail1_JN

A couple of coloured splats offers the accent colours support and makes for a nice detail.

detail6_JN

Mini Typography stenciled detail works well on the background. I could have added the stenciled details in a colour come to think of it.
It just shows you how versatile this range is – perfect for everyday moments, school days, vintage, heritage and boys.

detail2_JN

detail5_JN

Thanks for stopping by today. We hope you have enjoyed seeing the versatility of this range as showcased by the Design Team the last couple of weeks.
Some more amazing designs heading your way with this month’s ranges…so come back soon.
Live Creatively – Jowilna!

Kaisercraft products: Documented Collection – P2461 Measurement | P2466 Qwerty | CT898 Collectables | IT030 Typography Mini Template | PL501 White Pearls
Other: Re-inkers, thread, sewing machine, watercolour paint

Chardon Layout – Behind the scenes in Scrap Affairs Magazine with Tsukineko Inks

Create beautiful shimmering stamped images and chipboard elements in a few easy steps using a selection of your favourite ink pads. Combine and layer inks for beautiful life-like effects with loads of character and interesting details and effects.
JN_lovelife_detail5

This layout is one my favorites featured in the latest Scrap Affairs Magazine here in South Africa.
It features my Chardon range of patterned papers with a stamp I designed as well using the gorgeous Brilliance and Versamagic Dew Drop Inks pads from Tsukineko.
Photo Credit: Annamarie Burger for Minette Botha

blogimage

I created loads of beautifully stamped leaves using a stamp I designed and made by Celebr8 in South Africa.

JN_step1

Ink a leaf stamp using your Oasis Green Versamagic ink pad. Lightly mist the inked stamp with water and stamp the image onto technique cardstock. Clean your stamp with your stamp shammy.
JN_step2

Ink your stamp only partially with Versamagic Turquoise Gem. Mist the inked stamp with water. Position the stamp over the original stamped image and stamp.
JN_step3

TIP: Don’t stress if the stamp is not lined up perfectly this just adds to the watercolour look and perfectly imperfect feel of the image.

Ink your cleaned stamp with Versamagic Night Sky only in selected areas, mist with water and stamp over the first two layers. You now have a beautifully stamped multi-coloured and dimensional leaf image.
JN_step4

TIP: Repeat the first step stamping your image using Versamagic Oasis Green. Always stamp the lightest colour first and then layer your darker colours on top. Darker colours are easier to layer onto lighter colours than what it is to layer light colours onto dark.

Stamp your image again only partially using Brilliance Pearlescent Poppy. Ink the cleaned stamp only partially using the Brilliance ink. Mist with water and then stamp the image. The Brilliance ink gives the pigment ink below a beautiful shimmering effect.

JN_step5

Finish off your stamped images with another layer of partially stamped Versamagic Night Sky.
JN_step6

Cut out your stamped leaves and ink the edges as desired.

With a few easy steps and changes of ink colours and layers you can create a beautiful variety of stamped elements for cards and layouts.

Create a beautiful shimmering layered chipboard wreath
Use your Versamagic Oasis Green and ink the chipboard element using the direct to paper technique. Lightly pat the ink pad onto the chipboard repeatedly until it is covered in a solid layer of ink
JN_step8

Add a layer of Versamagic Turquoise Gem on top of the first layer of ink.
JN_step9

Add a layer of Versamagic Night Sky ink here and there. Notice how I only lightly inked the edges using this darker shade of ink.

TIP: Leave the layers of ink to dry a bit in between inking. If the ink is too wet and you add another colour you may contaminate your ink pad with the previous colour. You can heat set the ink layers for a few seconds just to dry them slightly.

JN_step010

Add some red highlights by using your Brilliance Pearlescent Poppy ink pad and inking the outside edges.

JN_step011

 

Add a few drops of Distress Oxide Worn Lipstick directly onto your inked chipboard element. Mist the ink drops with water and let the ink flow and bleed all over the chipboard. Leave to dry or heat set using your heat gun.

JN_step012

Paint a thin layer of All-Purpose Champagne Mist over the entire chipboard element. This layer will not only make the coloured chipboard shine and shimmer, but it will blend all the colours beautifully and seamlessly together for a stunning well inked effect.

JN_step013

Products required:
Versamagic Oasis Green Dew Drop
Versamagic Turquoise Gem Dew Drop
Versamagic Night Sky Dew Drop
Brilliance Pearlescent Poppy
Distress Oxide reinker – Worn Lipstick
All-Purpose Ink – Champagne Mist
Water-misting Bottle
Leaf Stamp – Short Cuts
Stamp Shammy
Chardon Patterned papers – Jowilna Nolte
Technique Cardstock – Short Cuts
Small soft paint brush
Craft sheet

JN_lovelife_detail4

JN_lovelife_detail2

JN_lovelife_detail7

JN_lovelife_detail3

Kaisercraft Factory 42 Layout – Dubble page

posted in: Layouts | 0

Its been a while since I have blogged, for various reasons, one of them being technology. It has been a trying time getting computers fixed, built, and new for the next ten years.
And I am happy to say and confidently, and full of faith that all is well in the land of technology now.

Today I am sharing this page using the Kaisercraft Factory 42 range. I love everything about this range and can’t wait to get stuck into it some more to create some beautiful layouts.
This one was a special layout and perfect for a father’s day gift in a frame.2017-08-16 Double page fathersday layout_JN

I used a combination if inks to colour loads of cogs and gears for this layout. On top of them I added a collection of buttons, washers, brads and diamante.

JN5

JN4

JN3

JN2

The nice thing about this grouping of elements is that I could use old and new elements from my stash to complete the layout – getting rid of years of accumulated embellishments  is such a win!

JN1

have you been inspired by this range for layouts, cards or mixed media projects yet?
Hop on over to the Kaisercraft blog to find more inspiration from the design team.

Kaisercraft Products: Factory 42 Collection P2376 Assembly Line | P2377 Automated | P2374 Ironworks | P2372 Machine | RS448 Antique Gold Rhinestones
Other: Distress Oxide Ink | Gear die-cut | Brads | Photo turns | Buttons | Diamante | White Cardstock | Embroidery Thread | Heart Stencil